Journal of the Serbian Chemical Society 2003 Volume 68, Issue 12, Pages: 979-988
doi:10.2298/JSC0312979P
Full text ( 652 KB)
Cited by


The role of the concentration profile of titanium oxide on the electrochemical behavior of RuO2-TiO2 coatings obtained by the sol-gel procedure

Panić Vladimir V., Dekanski Aleksandar B., Mišković-Stanković Vesna B., Milonjić Slobodan K., Nikolić Branislav Ž.

In order to understand the role of TiO2 in the deactivation mechanism of an active RuO2–TiO2 coating, an additional TiO2 layer was introduced in the support coating interphase of regular Ti//[RuO2–TiO2 anode in one case and on the surface of the coating in the other. The electrochemical behavior of these, with TiO2 enriched, anodes was compared with the behavior of anodes with regular RuO2–TiO2 coatings, which were subjected to an accelerated stability test. A high-frequency semicircle in the complex plane plot obtained by electrochemical impedance spectroscopy, for a regular RuO2–TiO2 coating corresponds to TiO2 enrichment in the coating as a consequence of anode corrosion. In the case of the coatings with additional TiO2 layers, a high-frequency semicircle was not observed. The additional TiO2 layers increase the coating overall resistance and influence the coating impedance behavior at low frequencies. Similar equivalent electrical circuits were used to analyze the impedance behavior of coatings having an additional TiO2 layer at different position within RuO2–TiO2 coating.

Keywords: RuO2–TiO2 coating, corrosion stability, oxide sols, sol-gel procedure, electro-chemical impedance spectroscopy

More data about this article available through SCIndeks